At least when it comes to One Block Wonders (OBW) it does. There are so many “Size” questions when it comes to choosing our fabrics. What size repeat should I choose? What size panel? What size strip width should I cut? What size design elements. The first thing I do when choosing OBW fabric is check the size of the repeat. Then I decide what size to cut the strips based on the size of the design elements. If I want to cut my strips 3 3/4″ wide then I want the design in the fabric to be larger than 4″ or I will not be taking the fabric apart.
I was going through my OBW stash and this found fabric I had started to cut up. I don’t know how long I’ve had it. It was The Saturday Evening Post line by Quilting Treasures. I had 4 yards of this striped pattern and another 4 yards of a different layout. I separated the strips and then found the repeat which was 8″ x 23″. I decided it was large enough to align the repeats and cut into 3 3/4″ strips. I could have cut the strips narrower for small blocks but I decided the design elements were large enough for 3 3/4″ strips which make 6″ finished hexagons. I used the ripping method to separate the strips to be sure they were straight. I have to say I don’t like this method. It made the edges wavy and was rough on the fabric. It may have easier to rip but next time I will use ruler rotary cutter,
It is not quilted yet but I do like the design. I used strips from the original fabric for the inner border. The outer border is from fabric number 2. It was also a striped with these small 5″ squares and larger 10″ squares below:
I have eight 10″ blocks of each, that leaves 6 panels for the blocks and 1 for the top with one leftover. Repeats can be from yardage or 6 panels can be used for our hexagon blocks. If I cut the strips 2 3/4″ I will get 3 strips will a little wiggle room left over. If I cut the strips 2 1/2″ wide I will get 4 strips with very little margin for error.
I made this 12″ block from hexagons cut from 1 1/2″ strips.
The photo of the tree is from Forest Hills Cemetery in Utica, NY. It is just above the grave of Mary Louisa Johnson, Daughter of John Adams, granddaughter of John Quincy Adams (6th President of the United States) & Great Granddaughter of John Adams 2nd President of the United States. The panel was 36″ 44″. It was so large it took 12 flowers pins to align it instead of the usual 6. I can’t wait to design it.
I spent last weekend cutting these panels into equilateral triangles. Now I’m ready to stitch away to my hearts content.