Tag Archives: Fabric.com

Up Up & Away – OBW #75

Quarantine quilt number 4 – “Up Up & Away, in My Beautiful Balloon”. While I was visiting my family in Lake Havasu City last January I got to attend their Hot Air Balloon Festival. It was fabulous.

I saw this panel by Greg & Company on eQuilter and just had to get it for a One Block Wonder.

First thing, decide what size strips to cut. I start by trying to get an idea of how many hexies will fit across the top and/or bottom of the panel. It is just like making a pieced inner border to fit around the center of a quilt. The width of the panel should be evenly divisible by the  finished size of my hexagon block. This panel measured 34″ x 44″. Even though it is a large print that would support a 6″ finished hexie, the 34″ width is not evenly divisible by 6″. I did not want to trim too much off the panel so I decided to cut my strips 3 1/2″ wide. That would yield 5 1/2″ finished hexagons. If I trim one inch off the panel side making it 33″ x 44″, meaning 33″ divided by 5.5″ = 6. Now I know I will get 6 hexagons (or 12 half hexies) across the width of the panel both top and bottom. Download my Tips for Using Panels for a OBW:

I started at the bottom and worked my way up the sides and across the top.

I used most of my hexagons and got achieved a design I was pleased with.

I number my rows and stitch the half hexies into rows. Then I join the rows pressing all seams open. I cannot stress enough how much easier it is to press your seams open with the help of my Strip Stick. I have 4 different sizes. The 48″ Strip Stick makes pressing the long seams open go quickly without disturbing the previously pressed seams.

I stitch my hexies into 4 groups. Top, bottom, left and right.

I decided I wanted to applique the bottom section to the panel first. Instead of trimming the points I pressed under a 1/4″ seam and stitched it onto the bottom of the panel. I chose to attach the right side next by matching up the dog ears as you would when joining the rows and stitch three quarters of the way up towards the top of the panel (partial seam).

By using a partial seam, it allows you to match up the dog ears of the top hexies with the side rows of hexies. 

I will mark where the top hexies hits the top of the panel, add a 1/4″ seam allowance, trim the hexies and stitch to the top of the panel. I decided to trim the hexies because I did not want to cover the balloons.

Now I can finish the partial seam.

With the top, bottom and side hexies stitched in place, I can easily attach the left side hexies to the panel matching up the dog ears.

This is one colorful One Block Wonder. I have ordered some great fabric from Fabric.Com for the back.

As soon as it arrives I will quilt it and send it you Angie!

Tucker Approved!