Mysterious Kitty | If These Threads Could Talk

If you follow me you know I love my Chihuahua Tucker.

But, These cat panels by Rubin Design Studio, exclusively from eQuilter are just fabulous!

Mysterious Kitty panel measures 43.5″ x 29.5″. I decided to cut my strips 3.25″ yielding 168 – 5″ finished hexies.

I decided to start my design at the top of the panel, choosing the upper right corner to start, and placing 8 hexies across the top before going down to start the left side.

Above is the design I settled on. The edges of the panel range from black to dark blue. I didn’t think the green from the eyes would show up much, so I added Framed 60 stars to the upper right corner. They make the Kitty’s eyes sparkle more. I added Star 60 units to the left side in orange and blue made using the Star 60 Tool.

Above shows the top and bottom sections attached to the panel. Notice how much it shrinks when stitched together. We know we lose 1/2″ between straight seams. But, when stitching the hexies into rows we lose 9/16″ between seams. Depending on how many hexies are in your row, you lose about 3″ or more.

There are always two opportunities to tweak the design. The first is while designing with the hexies. The second is after you finished designing and the rows stitched are together. The photo on the right shows the top stitched together un-tweaked. I needed to soften the dark corners on the bottom of the panel. The photo on the right shows the top tweaked. I added appliqued Star 60 units on the lower right and left corners of the panel in different sizes and colors to created more of a curve I was looking for.

In my OBW Supply List, I show you a method to create appliqued hexies using fusible knit interfacing. This time I tried something different. I used Steam-A-Seam. I traced the fabric unit on the Steam-A-Seam paper, and then cut it out at least 1/4″ smaller. Following the Steam-a-Seam directions, I attached it to the back of the fabric unit. I removed the paper and finger pressed the raw edges under 1/4″. It was now ready to be attached to the quilt top. Once I have all my appliqued units attached to the top, I top stitch them down using Superior Monopoly clear thread.