Tag Archives: Deb Tucker

Hunter Stars & Tucker Trimmer

I have been soooo busy making class samples and life in general. Last weekend I was helping Deb Tucker at her booth for the Genesee Valley Quilt Guild in Rochester, NY. They sure put on a great quilt show, they had over 600 quilts and great vendors. I came home and a few days later taught a beginning Hunter Star class at Sew Wilde in New Hartford, NY.

Patriotic Hunter star

Mine is a little scrappy. Students learned how to cut their trapezoids and star points. They also learned the design possibilities when you don’t sew the triangles together. It was a fun class

Next week we’re breaking out the Tucker Trimmer I and learning to make Rangeley Stars at Tiger Lily Quilt Company in Utica, NY.

Rangeley Wall Hanging

This is such a fun and easy star to make. We start with Quarter Square/Hour Glass Units using our Tucker Trimmers.

Yesterday I finished Solitaire, a Deb Tucker Quilt that utilizes the Tucker Trimmer also.

Tucker Trimmer Units

This block is made up of 1 hour glass unit, 4 half square triangles and 4 combination units all made with the Tucker Trimmer I.

Solitaire Block

When the units are sewn together it becomes the card trick block.

Solitaire

I love the pieced inner border in this quilt. When making the combination units you create a left and a right unit at the same time. One set is used in the blocks, the other in the border.

Solitaire

I did have a fabric malfunction. There are supposed to be cornerstones in the outer border but I cut them wrong and decided to finish it without them. The fabric I used was Stonehenge from Northcott Fabrics. It was sunny out so you can’t really see how vibrant the colors are.

Solitaire

Happy quilting, see you around the fire pit!

Spotlight on Quilt Designer Katrina Thomas

4 Replies

I wanted to help raise funds to support The New York Mills Historical Society (my hometown), so for me that means “Quilt Raffle”! I chose a pattern by fellow Studio 180 Design Certified Instructor (CI) Katrina Thomas. I met Katrina last March at our CI Reunion. This girl is on fire when it comes to quilt designing. Katrina is one of the features in Fons & Porter’s “Scrap Quilts” magazine for Summer 2015 on news stands now.

I lover her pattern called “Rolling Stars”. Katrina is a very creative designer. Her patterns feature the use Studio 180 Design tools, which I love! Check out Katrina’s website The Hope Chest Quilting to get her wonderful quilt patterns.

I chose Katrina’s pattern Lemoyne Baskets to make my raffle quilt.

I love Lemoyne Stars. This pattern is a twist on this process using the Rapid Fire Lemoyne star Tool by Deb Tucker. It also requires the Studio 180 Design Tech Sheet Lemoyne stars as Triangles.

Tuck, his brother Earl and his other brother Earl are in charge of quality control.

And Dave is keeping a close eye on my stitches.

The fabric for this quilt is Lady Slipper Lodge by Moda. I have named this quilt “Lady Slipper Lemoyne

Pop Luck

16 Replies

I just finished a class sample that I will be teaching soon from a pattern called Pop Luck created by Deb Tucker for Studio 180 Design. With the Corner Pop tool you can choose from 22 size options available and accurately remove a 90 degree corner from a base shape such as a rectangle, pieced unit, or block and leave the necessary 1/4″ seam allowance intact. You’ll then add an oversized replacement half square triangle and use the ruler guidelines and cutting edges to quickly clean up the corners to the perfect shape and size.

I made half square triangles, then I popped of the corner and added an oversized triangle and trimmed it up using the Corner Pop Tool.

You’ll be saving fabric and have pressing options not available with traditional the folded corners technique.

This is the finished Pop Luck top!

This is a fun project and a beautiful quilt.

I Love New York…. & Sew Much More

8 Replies

I’m getting excited. Next week I head south to the Mid Atlantic Quilt Festival in Hampton Virginia. I will be helping out Deb Tucker at the Studio 180 Design Booth, so please, if you are there stop by and say hello. I’m sorry I will have to miss my local guild “The Mohawk Valley Quilt Club’s” 35th Anniversary celebration. Congratulation to a great group of quilters.

I’m test driving my new Nolting quilt frame. It is pretty spectacular. Having a commercial frame makes my mid-arm work better. I have dreams of improving my quilt skills immensely. I bought the frame from Delightful Quilting & Sewing. Joyce and Ron Blowers are Nolting Dealers and drove 3 hours to my house in a snow event and set it up for me. I really liked them a lot! I need to take some lessons from Joyce.

I usually finish my quilts in the order they are pieced, (just a little OCD) but I wanted to finish “I Love New York” to celebrate the mountains of snow we have, with more on the way. There is a group on Facebook called “One Block Wonder Quilt Forum”. Someone asked me how I quilted my hexagon quilts. I meander mine, not just because that’s all I know how to do, but by going over every seam and center they lay nice and flat.

I was trying to be arty and photograph my quilt out in the snow, but there is so much snow (close to 3 feet in parts of my yard) I had a very difficult time getting a good angle.

So I gave up, scraped off mounds of snow and came inside.

No Pattern??? No Problem !

17 Replies

Did you ever see a picture of quilt that you really wanted to make but couldn’t find the pattern? If you can identify the units that make up the block, you don’t really need the pattern. Last year I blogged about being a “Block Detective”. I saw this quilt in a book By Doreen Speckmann. I loved it and wanted to make it, but not with the paper templates that the author suggested.

So, being a Certified Deb Tucker “Block Detective” I decided to try it out by making a block with 2″ finished units. I loved the bright colors against black & white backgrounds.

Now the search was on for fabric to make a whole quilt this time. I found the outer border fabric first and then pulled the colors for the block from that. I decided to make six 20″ finished blocks containing twenty-five 4″ finished units.

I initially chose yellow, orange, red and green fabric but later added a blue fabric . I also needed 6 different black & white prints for the block background.

The tools required were Studio 180 Design V Block, Squared 2 & Corner Beam Rulers and the Technique Sheet for making Sidekicks and High/Low units and don’t forget your Magic Wand!

Each Block contains 4 V Blocks with black & white side triangles,

and 4 V Blocks with black & white center triangles.

Each Block contains 4 Corner Beam Units with yellow center beams,

and 4 orange and red Corner Beam units.

The center of each block contains 1 Squared 2 unit.

There are 2 High/Low Left & 2 High/Low Right Units in each block.

I cut all my pieces first then laid them out one block at a time. I constructed the corner flowers as shown below.

I press the seams as instructed for each of the units, but when I joined the units into the block I pressed my seams open.

Join the units into rows.

Then join the rows to form the block.

These are some wild colors. This quilt was fun to make. So next time you want to play “Block Detective” get out your graph paper and Studio 180 Design tools and discover what you can do! If you have any questions don’t hesitate to contact me.

Someone Dropped a House On My Sister

3 Replies

The tune “Back in the Saddle Again” is playing in my head as I stare into the Shultz & Dooley mirror hanging over my sewing machine.

I’m getting ready to work on the Wicked Witch Panel below. I’m a Wizard of Oz fan! This is my first project in the new house. The panel measures 34″x42″. I decided to add Lemoyne Star cornerstones and stripped borders. I pulled the colors from the panel, Kona Black, Midnight Blue and Grass green to match the Witch’s Skin.

I know I have blogged about the Rapid Fire Lemoyne Star Ruler before but thought I would reiterate some tips.

Below I have cut 2 background strips and two star strips. I know these are dark colors but I like the way they work with the panel. I have marked my background strips A and B and 2 additional marks down from the top of the strips on the adjacent, inside edges the same distance as the strip is wide. What that means is; I chose to make an 8″ finished Lemoyne star so I cut my background strip 3 3/4″ wide by width of fabric (WOF). So I marked the inside edges down 3 3/4″. With right sides together I place the star strips on the marks as shown.

Stitch the strips as shown.

Quilting is a Pressing Matter!!! What I love about Studio 180 Design Tools is the care Deb Tucker takes in telling you how to press your seams. I did not know this until I was Studio 180 Design Teacher Certification Training, “Whatever You Are Pressing Toward – Goes On Top”! Genius!

When pressing strip A, the seam gets pressed toward the background strip. I then place the strip on the ironing board with background side on top and press. Strip B seam is pressed toward the star strip, so then the I place the strip with star strip on top. We now have mirror images.

Place Strip B right up on the table, then place strip A on top, right sides together. I start by just matching up the edges. Then using my fingers feel along the seams to determine if the seams are nesting properly. I always gently peel back each end to see if the seams are nesting. If we pressed the seams correctly it will nest nicely.

Now we are going to establish a 45 degree angle by placing the edge of the Rapid Fire Lemoyne Star ruler on the stitched seam line and then bump up another cutting ruler against the angled edge.

Make the first cut.

Place the cutting ruler on that beautiful 45 degree angle and cut strips the width of your star strip. For an 8″ Lemoyne Star I cut 2 1/5″ strips. So I make a 2 1/2″ cut.

You can go ahead and make all your 2 1/2″ cuts, but I prefer to make the first cut and then make the second cut by going vertically south to north and position the ruler edge at the tip of the star point and trim straight up.

These triangles will be the side pieces for your unit.

Once all your units are cut, open your units with A on the right and B on the left as shown below.

This is a great tip from fellow teacher Jane Godshall: Take two paper plates, label one A and one B. Open your units as shown above place all the A units on one plate and B units on the other. This will save you from confusing them.

Take plate “A” to the sewing machine, center and stitch one side triangle to each unit.

Chain stitch all the “A” Units.

Take the chain to the ironing board. “A” pieces will be pressed toward the star point fabric so lay the chain with the star point fabric on top.

By chain stitching the “A” units together and pressing, it keeps your brains from falling out trying to keep straight what unit you are working on.

Now chain stitch the side triangles to the “B” units with the side triangles on top.

Press.

Our “A” and “B” units are ready to trim.

Sorry for the glare, I’m having lighting issues. I don’t care for most ruler gripping products but I love InvisiGrip. This product helps keep your ruler from sliding with bunching up your fabric when you are positioning the ruler. You will definitely want to use some on your Rapid Fire Lemoyne Star Ruler. As you put pressure on the ruler toward the point it will keep it from moving.

Sorry my fabric is so dark. Place your unit with the star point facing towards 2 o’clock, this helps with trimming both sides without repositioning the unit. I am making 8″ Lemoyne stars so I align the desired block size lines with the sewn seam lines. You really want a sharp blade in your rotary cutter for this trim!

Trim all your units before sewing the “A” and “B” together.

Once the “A” and “B” units are sewn together, trim the dog ears from the star points. Sew 4 units to make a block.

Square up using your Tucker Trimmer 3.

I think it came out pretty good. it measures 52″x60″.

My last Quilt Class in Virginia

16 Replies

Today I taught my last quilt class in Virginia. In about 6 weeks I will be moving to Upstate NY, Utica to be exact, my hometown. Today we finished up our Doubly Charmed class where we first made the Corner Beam quilt.

We saved our side triangles to use in our V Block quilt.

I want to thank Nancy, Denise, Carol and Karen for a great last class!

Jennifer Griffin will be taking over the Studio 180 Design Tool Demo classes in Virginia Beach. She is happily holding up the Diamonds Rects tool. In her first demo class she will teach you to make a simple Storm at Sea using the Studio 180 Design Diamond Rects and Squared2 rulers. I know she will do a great job! Look out NY, get ready for One Block Wonders and Deb Tucker’s spectacular rulers and quilt patterns.

Green with Envy????

6 Replies

No, just green with batting. Quilters Dream Green that is. I completed “Twister” a Studio 180 Design pattern for a class I was teaching several months ago, but I just now found time to quilt it. I love this pattern, it is a companion pattern for the Tucker Trimmer I. There is nothing like a pieced border to give your quilt eye catching appeal. I used a focus fabric by Alison Glass called Lucky Penney in the border. It was my jumping off point for the colors I chose.

This was my opportunity to try Dream Green earth friendly batting, made from 100% recycled plastic bottles. Recycled plastic bottles are cut into chips, washed, melted and extruded into fine polyester fibers. Processed using the close-the-loop recycling chain, it is pro-environment in both its raw material source and its manufacturing process. Each pound of Dream Green Batting keeps 10 plastic bottles out of our landfills.

Dream Green loaded easily and stitched beautifully. There is no scrim or resins, yet you can stitch up to 12″ apart. I machine washed it in warm water and dried it on a medium heat. I thought it behaved very much like cotton batting. There was very little shrinkage. I was pleased with Dream Green and will use it again.

Twister is a great skill building pattern.

I Am No Longer a Wool Virgin

8 Replies

If you have ever wanted to make migrating geese, I am here to tell you they are not difficult. You do not need a special tool. This process is a Precision Technique so be sure to use your best skills when cutting, marking, stitching & pressing. Deb Tucker has a Technique sheet that shows you a quick easy and fun way to make these migrating geese in 7 different sizes.

I decided to try (for the first time) Dream Wool by Quilters Dream Batting. Dream wool is made in the USA, from a blend of fine domestic and Merino wool. Dream Wool contains no scrim or resins, it is carded, crosslapped and thermally boned for uniformity and strength. It was like quilting on air

Quilts made with Dream Wool may be machine washed and dried with little shrinkage using cool water and a cool dryer. Of course I did not follow these instructions because that is how I roll. I did wash it in cold water, but I dried it normally, as I would any quilt. It did shrink, but not dis-similar to a quilt with 100% cotton batting.

I love this process for making Migrating Geese and encourage you to try it.

Victorious

8 Replies

I just finished quilting and binding my Studio 180 design pattern “Victorious” I’m on my quest to branch out and try other battings. Of course my preference is any batting by Quilters Dream. This time I used the “Blend”, 70% cotton & 30% polyester, needle punched onto an ultra light scrim base. It was created especially for machine quilters.

It was very nice to work with. It didn’t stretch out of shape at all. It stitched beautifully. It held its shape throughout the washing and drying process.

Victorious is a beautiful traditional quilt pattern that uses the Deb Tucker V Block tool and the Squared2 tool for units in four corners of the border. The V Block tool was also used to create the diamond shapes in the border. Although, now Deb has created the Diamond Rects tool that could also be used to create the border units.