Category Archives: Corner Beam

Journeys Month 12 – Quilt Assembly

Welcome, Welcome, Welcome to Stitchin Heaven’s Journey’s BOM – Month 12! This has been a spectacular year. You all have worked so hard. Thank you to Deb Luttrell, Founder of Stitchin Heaven, Deb Tucker, Creative Kingpin of Studio 180 Design, Marie Bostwick New York Times best selling author and Jason Yenter Fabric Designer & President of In the Beginning Fabrics for making this all possible. Now to assemble your quilts!

Note: WOF stands for width of fabric. This month you will assemble your quilt top and add the borders.

Gather the following pieces:

4 Corner Sections from Month 6

Block K from Month 7

4 Middle Edge Sections from Month 9

4 Pieced Border sections from Month 11

Finishing Instructions

Step 1 – Lay out the Corner Sections, Middle Edge Sections, and Block K as shown in the diagram on page 35.

Step 2 – Stitch the sections together into rows, press the seams open. Stitch the rows together to create the quilt center.

Step 3 – Attach the 72½” Print 11 inner border strips. Find the center of the quilt and the center of the 72½” border strip. Match the center points with right sides together, pin. Match both ends of the strip with the ends of the quilt and pin in place. Ease the quilt top to match the border strip and add more pins between the others to hold the border in place as you stitch. Attach the other 72½” border to the opposite side in the same manner and press toward the inner border strip.

Step 4 – Repeat step 3 for the 75½” Print 11 border strips.

Step 5 – Attach the 75½” Print 6 middle border strips. Using two of the border strips, stitch them to the quilt in the same manner as in step 3. Press toward Print 6.

Step 6 – Stitch a Print 4 middle border corner stone to each end of the remining 2”x 75½” Print 6 borders. Press toward the middle border.

Step 7 – Attach the remining two middle border strips to the quilt as described in step 3. Make sure to nest the seams. Press toward the middle border.

Step 8 – Add the pieced borders. Start with the borders that do not have the N Units on the ends. Orient the pieced borders so that the Corner Pops are against the middle border and the points of the V Blocks are pointing away from the quilt center. Refer to the diagram. Find the center of the quilt top and the center of the pieced border. Match the centers and pin. Match each end and pin. Ease the border to match the quilt top and add more pins between the others to hold the border in place as you stitch. Stitch in place. Press toward the middle border.

Step 9 – Repeat step 8 for the other pieced borders with the N Units attached to the ends. After you have matched the centers and the ends, make sure that you nest the Corner Beam seam with the seam attaching the pieced border.

Note: We recommend that you wait to cut your outer borders to length until you can measure your quilt top. To determine your specific border length, measure the longest side of your quilt in three different places. If those measurements are different, add the three measurements together and divide by three. That will be the length that you need to cut your first two borders. Once the first two borders are attached to the quilt repeat the process for the remaining two sides.

Step 10 – Add the outer borders. Find the center of the quilt and the center of the 90½” outer border strip. Match the center points with right sides together, pin, match either end of the strip with the ends of the quilt, and pin in place. Add more pins between the others, about every 4”, to hold the border in place as you stitch. Attach the other 90½” border to the opposite side in the same manner and press toward the outer border strip.

Step 11 – Repeat step 10 for the 102½” outer border strips.

Step 12 – Finish with Batting, Backing, Quilting, and Binding! Layer quilt top with batting and backing. Baste and quilt. Bind and Enjoy!

Journeys

Thank you all so much for joining us on this Journey! Congratulations on a job well done!

Journeys Month 9 – Corner Beam

Welcome to Stitchin Heaven‘s Journeys BOM Month 9. You all have worked so hard. This month you will learn to use your Corner Beam tool. Sue Tucker & Naz are my helpers for Month 9.

You will be working with Print 1, 4 and 11 this month.

Cutting the Center Beams

Step 1 – Stack the 7” center beam squares up to 4 layers deep. Align the Center Beam Trim #1 line on your Corner Beam® tool and the 6” finished unit line (bottom edge of tool) with the raw edges of your stack of squares. Cut along the angled edge.

Step 1

Step 2 – Rotate and cut again. Lift and reposition the Corner Beam® tool, aligning the dashed line labeled Center Beam Trim #2 with the previously trimmed angled edge. Cut again. Do this for all your center beam squares.

Step 2
Step 2

Cutting the Side Triangles

Step 3 – Fold the side triangle strip right or wrong sides together in order to yield mirror images. Trim the selvages and position the Side Triangles Trim #1 line on your strips, lining up the 6” finished unit line (bottom of the tool) with the bottom raw edge of the strip. Cut along the angled edge.

Step 3

Step 4 – Rotate the Corner Beam® tool and position the Side Triangles Trim #2 line on the edge of the strip you just cut, making sure the bottom of your strip is lined up along the second trim line. Cut along the edge. Continue cutting until you have 8 pairs of side triangles from Print 11 and 4 pairs of side triangles from Print 1.

Step 4

Step 5 – Lay out and organize your pieces into the correct positions as shown to ensure you sew the proper sides together.

Step 6 – Stitch the first side triangle to each center beam, making sure you sew the correct triangle edge to the center beam. Press the seams open.

Press seams open

Step 7 – Stitch the second side triangle to the other side of each center beam. Press each seam open

Step 8 – Position the trim down area of your Corner Beam® tool on your unit. Carefully line up the diagonal seam guidelines on the Corner Beam® tool with the diagonal seams of your unit. Trim.

Step 8

Step 9 – Rotate your unit. Align the cleanup lines for the 6½” cut size with the cut edges, the V shaped guideline with the seam intersection, and the tick marks with the seams at the wide end of the beam. Trim. Repeat for all units. Label as indicated in the Unit Summary.

Step 9

Assemble 4 Middle Edge Sections

It is time to assemble the four Middle Edge Sections of your quilt. To do this you will need the following:

8 Units A from Month 1
8 Units B from Month 2
8 Units D from Month 2
16 Units H from Month 5
16 Units L from Month 8
8 Units M from Month 9

Step 10 – Lay out the units as shown to create the Middle Edge Section.

Step 11 – Stitch the units together into rows. Press the seams open between the units.

Step 12 – Stitch the rows together into the Middle Edge Section. Press the seams open between rows.

Step 13 – Repeat steps 10-12 to make a total of 4 Middle Edge Sections.

Steps 10 – 12
Naz carefully supervised Journey’s Month 9

Make 4 Middle Edge Sections. Congratulations on work well done!

I Will Be Your Guide On This Journey

Stitchin Heaven Quilt Shop is excited to announce a new collaboration of a unique BOM program from Deb Tucker (Studio 180 Design), NYT and USA Today best-selling author Marie Bostwick (Between Heaven and Texas, Hope on the Inside, and the Cobbled Court Quilt Series, including A Single Thread), Deb Luttrell (Stitchin’ Heaven), and Jason Yenter (In the Beginning Fabrics). In this 12-month program you will take your own Journeys through an exclusive novella written by Marie Bostwick. Each month you will receive a chapter from the book which is exclusive to this program. It is a page-turning tale of love, loss, and new beginnings for PJ Lloyd, an adventurous young woman who defies her family and risks her future to make a difference after the attack that plunged America into the second World War.

I will be your guide on this “Journey”. Every month I will post a tutorial showing you how to use the tools required for this beautiful quilt and answering your questions.

Throughout the Journeys BOM you will be on your own journey to learn how to use 8 of the tools from Studio 180 Design. Tools include: V Block, Corner Pop, Four-patch Square Up, Tucker Trimmer, Rapid Fire Lemoyne Star, Square Squared, Wing Clipper, Corner Beam. The final quilt measures 102″ x 102″. A beautiful collection of fabrics have been designed by Jason Yenter of In The Beginning Fabrics, that will make this project an heirloom favorite.

I tested the pattern with fabrics from Deb Tucker’s stash. It is truly a beautiful quilt I can’t wait for you to make your own! The Journey’s BOM program is due to start in September 2020. We will be sure to keep you up to date and informed on all the details.

A conversation with Deb Luttrell, Deb Tucker & Marie Bostwick

Rockets Red Glare

The fabrics used to make this quilt were given to me by Northcott Fabrics.

What I love about EQ8 is once you have drawn a block, you can easily rotate it, edit and change the color.  Rockets Red Glare came about as I was playing with Studio 180 Design’s BlockBuster 12 Double Trek .  This block is made with the Corner Beam , Tucker Trimmer I tools and the Sliver Technique Sheet.

This is the Original BlockBuster 12 Double Trek Block and the quilt layout I first came up with.  It seemed there was too much empty space.

Double Trek Block

I added a Half Square Triangle in two corners of the block.

Doublr Trek 2

I think that made a great difference.  I downloaded Northcott Essence Fabric into my EQ8 software to see how it would look…very patriotic, hence the name “Rockets Red Glare”.

img_3043

Northcott fabrics as always represent high quality.  The fabrics I chose to complete my quilt are from the Essence line and are absolutely beautiful.

If you want to try your own version of this quilt click here for the Rockets Red Glare Supply List

Have a great Summer and go quilt something!

The Great Outdoors Blog Hop

The products in this post were given to me by Island Batik.

img_6392

Back in February when I received my Island Batik Ambassador Box 1 it contained a secret bundle that could not be shared until now!  Through out the month of August “The great Outdoors Blog Hop” is featuring Island Batik Ambassador’s creations using fabrics that were introduced at the 2018 Spring Market.  Go to Island Batik for links to all the Ambassador Blog Sites.

I was given fabric from the “Spring Blossom” line:

This slideshow requires JavaScript.

I managed to use 20 different fabrics from this gorgeous line in my quilt as shown above.

img_1343

I named my quilt “Firefly”.  It is my original design, and uses Studio 180 Design Split Rects & Corner Beam tools.  It measures 66″ x 78″.  It is designed using one 6″ finished block.

img_6373

Each block contains 1 – 4″ finished Corner Beam unit, 2 mirror image 2″ x 4″ finished  Split Rects units & a 2″ finished square.

img_6367img_6368

I chose 7 different fabrics for the Split rects units and 10 more fabrics for the Corner Beam units and squares.

img_1378

I got one star block by place the corner beam units in the center and a 2nd star block by placing the 2″ squares in the center which created the “Firefly” in the center, how cool is this?  I had so much fun making this quilt.

This slideshow requires JavaScript.

To celebrate the great out door places in Utica, NY, my sister Mary & I went all over taking pictures of my travelling quilt.  We went to the historical Utica Train Station, Forest Hills Cemetery (the tree was up the hill from John Quincy Adams granddaughter’s grave), Rutger Park 1 & 3, Franklin Square, Liberty Bell Corner, Bagg Square & Utica Bread (fabulous bakery) and then upstairs to Jay Groah Realtor Group (his office has the coolest 70″s vibe), we finished up at the Eagle with a beautiful view of Utica.

GIVEAWAY:  Please leave a comment about this post and I will choose a winner to receive this Island Batik Spoolin Around Charm Pack!  (Giveaway is US Only and ends September 5, 2018.  Please leave your email in the comment.)

#greatoutdoorsbloghop #islandbatik #islandbatikambassador

Northern Neighbors

Deb Tucker’s Northern Neighbors pattern features intricate maple leaves and flying geese.  The pattern makes two sizes: Twin (70″ x 95″) & King (104″ x 104″).  I bought the fabric for this quilt over a year ago and had the units cut and ready to sew together into blocks but I became overcome by events!  It was my goal to “get her done” before the year end and I did!

OLYMPUS DIGITAL CAMERA

Northern Neighbors Maple Leaf

This is my favorite leaf block.

OLYMPUS DIGITAL CAMERA

Deconstructed Maple Leaf

The leaf block is made using Studio 180 Design Wing Clipper 1 for flying geese, Corner Beam and Split Rects tools for great leaf point definition.

OLYMPUS DIGITAL CAMERA

One Block

I made the twin size, so I made 6 of these blocks.

OLYMPUS DIGITAL CAMERA

Northern Neighbors

It really is a beautiful quilt.

OLYMPUS DIGITAL CAMERA

Northern Neighbors Label

Can’t wait to see what next year brings.

How Many Geese in that Formation?

I’m getting ready for some upcoming trunk shows and decided to make some Studio 180 Design Tool samples.  There are 8 Fundamental Tools (not counting Tucker Trimmer 2 & Wing Clipper 2).  The Tucker Trimmer 1 makes Half Square Triangles, Quarter Square Triangles & Combination Units in 11 sizes from 1 inch to 6 inches.

OLYMPUS DIGITAL CAMERA

Above are Quarter Square Triangles in 11 sizes.

OLYMPUS DIGITAL CAMERA

The Wing Clipper 1 makes Flying Geese in 10 sizes from 1 inch to 10 inches.

OLYMPUS DIGITAL CAMERA

The Square Squared Tool makes 6 sizes from 1 inch to 6 inches.

OLYMPUS DIGITAL CAMERA

The Corner Beam Tool makes 11 sizes from 1 1/2 inches to 6 1/2 inches

OLYMPUS DIGITAL CAMERA

The V Block Tool makes 11 sizes from 1 1/2 inches to 6 1/2 inches

OLYMPUS DIGITAL CAMERA

The Split Rects Tool makes 8 sizes from 1 inch to 8 inches.

OLYMPUS DIGITAL CAMERA

The Diamond Rects Tool makes 5 sizes from 2 1/2 inches wide to 10 1/2 inches wide.

With the Corner Pop Tool you can choose from any of the 22 size options and remove a corner from a base shape such as a square, rectangle, pieced unit or block and leave the necessary 1/4″ seam allowance in tact.

OLYMPUS DIGITAL CAMERA

The block above is made from V Block and Corner Beam Units.

OLYMPUS DIGITAL CAMERA

I made 4 of the blocks but this time I popped of corners of the V Block & Corner Beam units before I put the blocks together, making this very interesting wall hanging.

Next I need to make samples for the Rapid Fire Hunters Stars and Lemoyne Star Tools.  Happy quilting!

OLYMPUS DIGITAL CAMERA

I’m a Double Nudger

I spent last weekend having a blast at White Eagle Conference Center in Hamilton, NY with Studio 180 Design Certified Instructors. We try to get together at least once a year for a reunion.  We share Ideas and help each other.  If you are looking for a Studio 180 Design Certified Instructor, go to Studio180Design.net and click on the Certified Instructor tab and you will see there are many of us available to teach.  Here are some of us at the reunion.

OLYMPUS DIGITAL CAMERA While at the reunion I worked on my Northern Neighbors quilt.    It only take 3 techniques to make this block: Wing Clipper (Flying Geese), Corner Beam & Split Rects.  Below is a block:

OLYMPUS DIGITAL CAMERA

What do I mean by being a ‘Double Nudger”?  When I’m making Corner Beam units I nudge the side triangles down just a nudge and then sew them down as shown below:

OLYMPUS DIGITAL CAMERA

Press toward the triangle and add the other side triangle again nudging it down just a bit before sewing it.

OLYMPUS DIGITAL CAMERA

It makes all the difference when you learn to nudge!

OLYMPUS DIGITAL CAMERAThen trim and it’s perfect.OLYMPUS DIGITAL CAMERA

This is my favorite leaf block!

OLYMPUS DIGITAL CAMERA

Overcome By Events

Have you ever been overcome by events?  It’s been two weeks since I last checked in with you guys.  I have been busy at work and have been unable to indulge in my passion of quilting.  This week-end I made a tote bag for my fellow Battgirl Neva.  She is a Wizard of Oz enthusiast as am I.  Neva wanted the Wicked Witch on one side.

Overcome by Events

And Dorothy on the other.

OLYMPUS DIGITAL CAMERA

I was at a Sew-A-Thon Friday night and Saturday and managed to get my next hexagon quilt blocks sewn together.  This fabric is from the Georgia O’Keefe line by Alexander Henry.  This will be OBW number 54!

OLYMPUS DIGITAL CAMERA

I also made a quilt label for my friend Paula.  She made a T-Shirt quilt that will raffled at the 2014 Neptune Festival in Virginia Beach.

OLYMPUS DIGITAL CAMERA

Next Sunday I will be teaching the demo class for the Studio 180 Design Corner Beam & V Block tools.  We are getting ready for the Deb Tucker “Double Charmed” class coming up at Sew EZ in Virginia Beach.  Below is the 20″ block we will make to help us get comfortable the tools.  The supply list can be found with the Class Schedule.

OLYMPUS DIGITAL CAMERA